11 Tips for Choosing a Best Projector for Home Theater

Hi everybody. Are you people looking for the best projector for home theater. Or looking for the best projector for office use. We have come up with the 11 tips for choosing the best projector for home theater.

Why 11 tips I don’t know it’s the list we came up with, that’s probably not exhaustive.

I know some people are going to read this article, and as soon as it’s done they’re going to leave comments that there was also some other tip we forgot or whatsoever but I think these are really good 11 tips for choosing the best projector for home theater.

I should say that these are in no particular order. This is just a list we came together as a team so don’t wait. This is based on the order that you see it.

We think these things would benefit all the readers when they are looking and shopping for the best projector for home theater.

So hopefully this is helpful and it’s a long list. so let’s go.

But hold on.

Before going further first look at some of the Best Projectors for Home Theater.

How to Choose the Best Projector for Home Theater

1. HDR

Whoever of you is shopping for a 4k projector make sure that the projector accepts HDR.

Doesn’t it.

So they have to accept HDR. But in some cases, you are planning to buy a projector and you think it should have HDR in it, and that is what you think you are getting with your 4k projector.

Not all 4k projectors accept HDR so make sure you get a projector that accepts HDR.

2. Lens Shift

It is always nice if it has a lens shift. Actually, it doesn’t have to have a lens shift, but it’s really nice if it does. It gives you a lot of flexibility when you are installing the projector. Lens shift is going to allow the lens to shift left or right and vertically up and down and so depending on where the projector is mounted and the way that that picture is projected on the screen.

It is going to give you a lot of flexibility to dial in that picture by making sure it’s hitting the screen just right without having to resort to something we call keystoning. Which were kind of starts manipulating the picture.

so a lens shift can solve a lot of headaches for you when it comes time for installation.

3. Lens Memory

It is really nice if your projector has lens memory. Now lens memory is going to be important if you care about switching between 16:9 and 2:3:5 content or what a lot of people refer to as anamorphic content. Those are the different formats of the screen so 16 by 9 is what we see on our TVs right now. If you ever watching a movie on your TV,  you’ll notice that sometimes there is black masking or bars above and below the picture on your TV. That content is not a 2:3:5 format or something close to it. If you are thinking about getting the screen that is in the 2:3:5 format you should have a projector that has Lens memory.

Also Helpful: How to Use Projector With Laptop

4. Controls

If you want your projector to accept control it should have the IR the IP or it could be serial, preferably IP or serial. But if it only has IR that is also better than nothing.

It is going to really save you a lot of headaches as it’s going to prevent you from having to use the projectors remotely.

If you are going to use a universal remote like a harmony remote or something more sophisticated like a Crestron remote, you want that projector to accept control.

It gives you the option to run it all through your universal remote in the app or to use Alexa with your voice to turn the projector on and off. whether to run a scene from the light switch the projector has to accept the control.  

So we’ll make sure the projector accepts control.

5. 4K HDMI

We should make sure that at least one of the HDMI inputs accepts 4k.  It is pretty obvious if your projector accepts 4k, it’s probably to have an HDMI that accepts 4k.

But you would be surprised typically with a projector if it has three or four HDMI Inputs. They are not all going to except 4k. Only one or two of those HDMI inputs are going to accept 4k.

If you want to understand how many options you have for 4k inputs, odds are, if you’re using a surround sound receiver or video distribution so you only have one HDMI going into the projector.

But if for whatever reason you need to send multiple HDMI out of the projector, it’s good to know how many 4k inputs you have. But at the minimum, you have to verify that you have a 4k HDMI input on the project.

6. Trigger

It is really cool if the projector has a 12-volt trigger.

That is not critical and also it is not essential. But say for example if you are planning to get a roll down the screen that 12 volt triggers going to allow the projector to trigger the screen to come down when the projector turns on and off.

It is going to help you tie that all, making it very easy to coordinate. The screen comes down anytime the projector turns on, with a screen going up and the projection turning off.

That is all driven from the 12-volt trigger on the projector so it is a really cool feature again.

It is not absolutely critical or absolutely essential particularly if you do not have a roll-down screen but it is always nice the projector has a 12-volt trigger.

7. Mount

It is really nice if it has a custom mounting plate for installation. It doesn’t have to have a custom mounting plate we use. There are a lot of really good Universal mounts out there.

What you’ll find is a projector to projector, those mounts don’t sit totally flush on the projector, and sometimes it’s hard to get the projector to be totally centered and balanced. And also over time, the projector will sag or tilt-up.

You’re going to be constantly tweaking that and sometimes depending on the installation we have got to really be precise about where the top of the projectors hung.

Notice you’ll see applications where the top of the projectors got to be hung right at the top of the screen. It needs to be very precise. Those projectors that come with a custom mounting plate usually install a little easier.

Typically it is a little bit more pleasing aesthetically and it usually holds that installation position a lot longer than some of the universal mounts you might play with.

8. Color Calibration

It is also really nice if it has advanced color calibration settings like ISF calibration settings. So you can go in and really dial in the colors and calibrate it to the room of the projector

It also really makes those colors pop, so you maximize the color in the image that is on the screen. really get those inky black levels that you want those bright whites and really have a picture, that all of your friends will say ……. wow.

9. Venting

It’s really good to understand how the projectors can vent. Based on your installation you may need a projector to vent either back or front or from other sides. That can’t have an effect on the type of projector you buy for your insulation.

 if you are going to take your projector and put it right up against the back wall of the room you probably don’t want a projector that vents out the back of the projector. It’s going to heat up. it’s going to be too hot. So you want a projector that’s going to vent differently.

So it’s important to understand the way that the vents are working on the projector and make sure that match your application.

10. Brightness

The number ten is lumens and if it doesn’t say ANSI lumens don’t pay attention to it.

It’s basically whatever the marketing person wanted to say it was ANSI lumens gives it some credibility.

One lumen is equivalent to a candle. The light the candle puts off so if you have a thousand ANSI lumens it’s like having a thousand candles that’s how bright the lamp is in your projector.

If it is a dedicated theater room and you have got no light doors closed, it’s going to be totally dark in that room you’re going to find projectors anywhere from 1200 to 1800 hundred lumens is going to be a great projector for you.

If you have a lot of ambient light in the room, you’re probably going to want more of a flame source. Something approaching 3000 ANSI lumens or like a laser that can really put a lot of light out on that screen to help cut through all the ambient light that’s in the room.

So lumens are very important. Make sure you pay attention to lumens. Make sure the lumens for your projector match the room in the application and how many ambient lights you have in the room. It will make all the difference in the world to you.

11. Throw

The last one is the throw distance. This is really important. There’s a great tool out there it’s on projectorcentral.com.

If you go to projectorcentral.com there’s a tab for a calculator. You go to the calculator tab. you can select the specific model of the projector that you want. You can tell the format of the screen if it is a 16:9 or 2:3:5 screen, and then it’s going to tell you how far back the projector can go to fill the screen size that you think you want the optimum distance.

It’s also going to show you hey like look if you want a one 120-inch screen this is the optimum distance for the 120-inch screen you want 150 feet well you can get it there but you’re going to it’s not going to be bright enough projectors. so you probably want the projector with more lumens or whatever it’s going to help you really dial in the projector the throw distance and the screen size kind of maximize all that together.

It’s a phenomenal tool we use it all the time and it’s very precise and is worth using.

Ending Notes on Best Projector for Home Theater

We love it we swear by now there are a couple of other things we didn’t cover. We didn’t cover the contrast ratio. The contrast ratio is obviously very important. That is sort of like your high dynamic range just talking about how black your blacks are like. If they’re inky blacks and if at the same time you have really bright white what’s that contrast ratio that’s going to do a lot for how crisp and sharp the picture looks.

The more detail we have in our inky blacks and the brighter our whites can get without clipping out the more detail. we’re going to have in that projection so the contrast ratio is absolutely huge but when you look at the specs they all say like it’s a billion to 1 contrast ratio. which really doesn’t mean anything to any of us so my recommendation is to read the reviews if you get a chance to look at the projectors and see for yourself what the contrast is what the blacks look like what the whites look like and get some personal input.

So whatever we do in terms of theater for projection for screens there are always trade-offs so one technology is going to enhance some elements of the projector but it’s also going to have some pitfalls.

One of the things you’re going to get some rainbow effect or color banding, while another projector is going to have what they call a pixel shift and so the pixels over time kind of start to drop and come together and you have to do things to adjust that all.

The different projectors also have pros and cons. So what the projector manufacturers are doing is maximizing the strengths of that technology and trying to minimize the weaknesses of that technology but they all have them.

My best advice for you is to try and match the best gear or the best technology so the best projector and the best screen for your budget and your application and that’s going to make you the happiest.

That’s not to say that these other things aren’t important but they’re only as important as it helps you fit the right gear to your application so there are 11 things you can look at when you’re buying a projector again.

That’s not meant to be an exhaustive list there’s a lot more we can dive into finding the best projector for home theater. We’ve got a lot more stuff coming on this topic.

You can also read other articles from 10Besties Knowledge base by clicking here or may go to the home page by clicking here.

Must Read: Are Mini Projectors Worth Buying?
Must Read: Which Is Better DLP or LCD Projector
Must Read: How Does a DLP Projector Work?
Must Read: Best Home Theater Projector Setup Ideas – How to Setup a Projector
Fahad, Mohammad.
Fahad, Mohammad.

Hi, I am Fahad, Mohammad. I am an Assistant Professor of Computer Science, a researcher, a die-heart entrepreneur, a blogger, and an affiliate marketer. I have many research articles published in reputed journals of the world. I also love to write about technology after my 20 years of experience in this field. I hope you will love this blog.
Don't forget to keep in touch with me through our contact us page, if you have any queries or suggestions.

Articles: 135

Leave a Reply

Your email address will not be published. Required fields are marked *